6 steps to optimise your network for VoIP
In this article, we will talk about how to optimise your network for VoIP.
So read this article till the end to get full knowledge and information about this. If you wish to gain knowledge about IP logins, then go right here.
In today’s technological age, we use the Internet to share knowledge and connect with our loved ones through various multimedia media. The Internet is designed for many purposes, but what if we use it to make voice calls without problems?
The way we do this is on our phones and mobile terminals that use specific telecommunications networks.
VoIP is the answer to your question. Voice Internet Protocol (VoIP) may be a technology that permits you to use a broadband Internet connection to form voice calls rather than a daily (or analogue) telephone line.
Since VoIP is not preferred by many, it is necessary to optimise it before using it to get the best results.
Here are six steps you should take to optimise your voice network for easy voice calls
1. Make sure your internet connection is fast
Always be careful when choosing your Internet service provider (ISP). VoIP calls require fast and continuous network connectivity. I prefer wireless to wired connections, as a separate cable is used in a wired connection to connect each device to the network, and each cable transmits data at the same speed.
Wi-Fi should be preferred over mobile internet networks when a wired connection is not available. The quality of your VoIP call will immediately depend on the type of Internet connection you use.
Instead of always going local, go for a standard, high-quality ISP and then complain about the problems.
2. Be aware of security issues
Cybercrimes are increasing day by day, and once your device is connected to the Internet, you are not protected from hackers. To protect your voice and data lines, your VoIP network’s infrastructure must include appropriate firewall policies, good antivirus and spyware, and malware protection programs.
Hackers easily find an opportunity to interrupt your VoIP call by creating interruptions on voice and data lines. Therefore, when you have good malware and hacking security programs in your system, you can experience uninterrupted and smooth voice calls.
The quality of your antivirus and your firewall policies will determine how efficiently your voice call is executed over VoIP.
3. Choose High-End Hardware
Hardware with your phone, cellphone, computer, etc., can cause some VoIP network problems if they are not up-to-date. This minor problem could also be a standard problem for several people.
Poor quality hardware echo can be the culprit for the issues. Solutions such as volume reduction help to overcome this problem for a while. So the more high-end hardware you use, the quality of your VoIP call will improve in many ways.
For example, if you have an Xfinity router, you must log into the Xfinity router to access the best network via hardware. The equipment you use should also have excellent software compatibility.
Generally, a fast Internet connection requires high-end computers and other compatible devices.
4. Good bandwidth
It is better that you increase your bandwidth based on the number of voice service lines.
At least 100 Kbps (0.1 Mbps) in both directions to avoid packet loss and ensure a successful VoIP call. For example, for ten voice lines, a bandwidth of 1000 Kbps (1 Mbps) is required.
Just make sure that your Internet connection has good bandwidth for any call and any level of network usage.
As your voice is converted into data and other data is converted into voice packets, bandwidth plays an essential role in this operation’s smooth operation. The bandwidth and quality of your VoIP call are better.
5. Check cable
Traditional and mostly older telephone systems use CAT-3 grade cable. Today’s cables for telephone, broadband and data networks are CAT-5 grade or better. Proper cabling ensures the best quality of service.
Since cables are the most integral part of VoIP infrastructure, there should be no compromise when choosing multiple cables. Also, make sure that the cables are appropriately connected to each hardware and device.
Sometimes removing a simple cable from a particular device can cause serious problems. So please check if the right quality cables are connected to the right place.
6. Make sure you don’t have a hub on your LAN
Whenever a LAN (local area network) is connected to multiple hubs, there are substandard voice calls over VoIP. To make the most of a VoIP call, each device must have a connection to its switch.
If your VoIP infrastructure has multiple Ethernet switches for different cable sharing, your call quality will suffer. Ensuring a separate link for each device and hardware with faster network connectivity.
Provides positive results when performing IP operations. Connecting multiple hubs to your LAN causes network traffic, and this overhead leads to the failure of your VoIP call.
So that’s it. In this article, we hope that you got to know how to optimise your network for VoIP. Therefore, with proper implementation of the above solution steps and considering the quality of service (QoS) and adequate broadband connection or Wi-Fi, VoIP can be a safe and reliable means of transmitting voice.
If you have any doubts about any of these, let us know in the comments section below.