How to Install Artificial Tuft on Your Lawn- 5 Top Tips

Artificial grass is common among many homeowners, and for a good reason. It saves water and offers considerable benefits to any home, which is the reason why many people install it on their lawns. Unlike genuine grass, this turf does not require constant watering and is associated with minimal maintenance. How can I install artificial grass on my lawn? This shouldn’t be an issue! Here are tips to guide you.

1. Kill existing grass safely

Ensure the entire lawn is dead before covering it with permeable turf if you’re replacing one that has turned brown or has been struggling for years. Solarizing is the most secure way to achieve this. Ensure you cover it in black plastic and bake it to death in the sun, along with any weeds still there. Alternatively, dig up the old grass and dig out four inches of topsoil to ensure you obtain all the roots.

2. Prepare a solid substrate

You can put artificial turf straight on the ground; however, the noticeable and distracting little bumps and downturns will prevent it from appearing like grass. Melbourne instant lawn experts recommend that you install a base layer of two rocks. Also, use a base of 4 inches and compact to form a firm surface. To make a smooth underlay for the turf, follow this with a 1/2 to 1-inch coating of crushed aggregate or decomposed granite.

3. Keep blade direction uniform

Similar to carpeting, artificial turf is sold in bulky rolls that are difficult to handle alone. You will need aid to position and place them. Once your dealer has delivered them, ensure you expose them to the sun to make them flatter and malleable.

Make sure the blades of both pieces of turf lay in the same direction when you need to place two sections of turf side by side to cover a large area. Your new lawn won’t look like a seamless whole if they’re facing in the wrong direction.

4. Cut edges slightly long

Trim the edges of the turf when you lay it. Acquire a utility knife and trim from the back to make perfect cuts. This way, you’ll have something to tuck under borders or up against pathways, leave a few extra inches on the edges. You can always take more cuts as a last resort if you leave too much.

However, if you leave too few, you risk having holes that are difficult to cover. Use landscape nails or staples to hold the edges in place. Use a knee-kicker similar to carpet installers to stretch the turf and maintain it free of creases and loose spots.

5. Spread infill and brush it in

Apply the preferred infill material using a drop spreader in the amounts advised by the turf manufacturer. After that, use a push broom with a firm bristle to sweep it into the ground in the same direction as the blades so they stand out and rise out.

Final thoughts 

Installing an artificial lawn in your home will enhance your home’s curb appeal and value. It eliminates the need for a lawnmower, more storage space, and the cost needed to maintain natural grass on your lawn. However, you should acquire it from a reputable company and have it installed by experts.