Crimp Connectors for Your Car at WirefyShop
To function properly, your car has a complex electrical system. There are a lot of wires that connect different electric auto components such as the battery, alternator, and lights. In most cases, the connections are made through special connectors. These simplify greatly the manufacturing of the vehicle as well as maintenance and repairs.
The use of wire connectors is sometimes a topic of debate among experts in the automotive industry. Some argue that soldering is a better alternative to connectors, especially when repairing the electrical system. Even though soldering has some advantages, connectors have proven to be more beneficial. And you can get them at WirefyShop, an online retailer that specializes in all types of wire connectors.
Hence, in this article, you’ll learn about the differences between crimp connectors and soldering. Also, you’ll understand why crimping is generally a better solution. This information will be useful if you are a DIY enthusiast. If you like repairing the electrical system of your car, remember to visit WirefyShop.com to purchase your supplies. So, let’s begin.
Should You Use Crimp Connectors or Soldering?
Some people argue in favor of soldering when you repair the electrical system of your car. The reality is that car manufacturers have already adopted crimp connectors as the best solution. So, for you, it is wise to follow suit. Here are some reasons why connectors are preferred:
- Cable connections are more resistant to moisture and dirt. Hence, this type of connection lasts longer. Some connectors are even waterproof to withstand the toughest environments;
- A connector is much more reliable. Over time, soldering degrades and, as a result, the connection fails. This doesn’t happen with connectors;
- Crimping connectors is much easier than soldering. This is evident when you have multiple cables and terminals. In such cases, multi wire connectors are much more practical.
Hence, if you want to repair the electrical system of your car, you better opt for crimp connectors. You can get electrical multi connectors from WirefyShop.com.
How Do You Crimp a Connection?
To crimp a connection, you need a crimping tool. This allows you to install the connector to a terminal, tap, or plug. All you have to do is expose the wire first by removing the insulation. Then, put the exposed wire into the corresponding pin or slot in the connector. Finally, you must apply some pressure through the tool to secure the connection.
For multi connectors, you just have to repeat the above operations as many times as necessary. Just imagine the time you save by crimping connections instead of soldering. For better protection, you can cover the connection with heat shrink tubing. This will seal it completely. Just remember that, if you want to use tubing, you have to slip it on the wire before you crimp. Then, just heat the tubing.
Get all types of connectors (ring, hook, fork, etc.), wire crimping tools, tubing, and more from WirefyShop.com. Buying connectors online is easy.