How to install parking bollards?
Bollards have been around for years. These posts were originally used to moor boats, but they have since been expanded to include traffic control, property protection, and pedestrian traffic guiding. If you are thinking about installing bollards around your commercial or residential property, keep in mind the following suggestions. Interestingly enough, you can install bollards on your own or employ expert bollard installers. But irrespective of your decision, make sure that the below-mentioned guidelines are followed.
Let’s Talk About Maintenance
For long-lasting bollards, regular maintenance is essential. Bollards, like any other objects that require ongoing care, need to be inspected on a regular basis. This will prevent rust or other environmental hazards from causing damage or ruptures. You can seek the help of a local specialist to do one annual service maintenance.
Bollard installation methods vary widely, and they are heavily influenced by the type of environment in which they are placed as well as the way in which they are placed.
Placement suggestions for bollards
Choosing the appropriate location is the first step you should take for the installation of a bollard post. You should consider the following suggestions for bollard placement whether you are installing parking bollards or installing bollards on uneven surfaces.
- Consider what you want to protect when choosing the right fit: a building, several facilities, pedestrian zones, parking lots, and so on.
- It is also a good idea to consider how frequently the site in question requires security.
- If you frequently organise outdoor events, installing detachable or retractable bollards can be a good choice.
- Fixed bollards, embedded in concrete bollards, or steel bollards may be the best option if you are looking for a long-term solution.
Places to install bollards
You should consider the type of bollard as well as the place where it will be positioned. Bollards can be installed in the following areas:
- Parking lot
- Entrance to a residential or commercial zone
There are several bollard choices to select from in order to provide both security and an attractive touch to the environment.
How to install bollards?
Learning how to install bollards might make the difference between a safe environment and one that is vulnerable to damage. Bollards can only provide protection if they are properly placed. Therefore, depending on the size and type of bollards you’re working with, heavy-duty construction equipment may be required.
It is strongly advised to use the services of a professional bollard installation specialist in these cases. DIY bollard installations, on the other hand, may be done for smaller jobs if only a few procedures are needed to be followed.
Removable Bollard Installation
Because both retractable and detachable bollards have essentially identical mechanisms, their post-installation procedures are extremely similar. These require a more comprehensive installation process and attention to detail as compared to permanent bollards.
- To install retractable or detachable bollards, you will need to use a high-powered drill to drill through the installation location. Make a huge hole that should be at least twice the bollard’s diameter.
- Set up gravel and a rebar cage at the bottom, which will allow moisture to move freely while also reinforcing the bollard.
- Depending on the type of bollard you choose, you must either install the bollard or the detachable bollard’s ground sleeve.
- You will have to keep it fastened from here on out while pouring cement into the hole.
Installing Permanent Bollards
Irrespective of what you choose; concrete bollard posts, steel bollards, or any other type of parking-bollards or ornamental bollards, the installation process for fixed bollards is faster and easier.
Instead of drilling, lining, attaching, and filling a hole in the ground, fixed bollard posts may be set up instantly on the surface. Indeed, this technique is much simpler to accomplish. However, this particular installation process is less secure as it poses the possibility of tampering.
Installation of Bollards on an Uneven Surface
Bollards that are angled have a structural disadvantage right away. This is one of the main reasons why hiring a professional rather than attempting a DIY project is preferred in this situation.
Uneven ground can provide a number of issues, but depending on the sort of installation required, a handful of correction solutions may prove to be beneficial. To improve stability, you can cut a new slab, modify the higher side, trim wherever necessary, or even apply non-shrink grout.
Installing bollard lights
Bollard lights are available in both solar and wired variants. However, for both variants, the ideal technique for placing bollard lights is the same. An expert suggestion is to avoid placing them in a straight line; this will make them look like an airline runway and will provide little to no aesthetic value to any environment. Instead, go for a zig-zag design, which adds a touch of individuality and can even illuminate a bigger area owing to the distinctive placement of the bollards.
Autor Bio: Jennifer is an editor and author at The Wheel Stop Co. The Wheel Stop is a leading wheel stops, bollards and speed humps suppliers in Melbourne, Australia.