Insight Into The PCB Assembly Rework Process

First pass Pb-free montage is difficult enough, but it is much harder to patch the circuit board. If you know what is a tactile switch then you will know what we are talking about. Pb-free exacerbates the problems of time, price, efficiency, and repair associated with Absolute PCB repairs. Additional time and costs are involved in retraining operators for Pb-free installation, refurbishment, and testing. In comparison to standard Eutectic soldering materials, the expense of non-PB materials as solder bars, cables, and metalcore welding is more costly.

Good PCB assembly practice calls for the creation of Pb-free training for citizens. Maintaining high-quality rework is more difficult because of multiple periods of higher temperatures for the Absolute PCB and the neighboring portion of the target rework component. The optimum preheat temperature is set at around 10 C below Tg (glass transition temp.) of the PCB material for the maintenance of the purity of the PCB laminate. https://www.victorypcb.com provides fast manufacturing high-quality 1-16L layer printed circuit boards (PCBs) products and the best PCB assembly services for customers with the advanced PCB production line. Small & Medium Batch at cheap price.

Circuit Board Repair Process

Both eutectics or-free, circuit board refurbishment mechanism is the same. Start with a good thermal profile, remove failed parts, clean the spot, and prepare the residues of rust or solder. Then, new flux and solder will take over the component; new flux will be done; the last stage is inspection.

This is the end of comparisons, and some important distinctions arise between PCB rework and Pb-free. These gaps present a range of problems and younger or changed procedures.

A host of rework problems can otherwise arise. For instance, the formation, due to excess heat necessary to rework Pb-free balls in the ball Grid (BGA), the separation of the BGA balls from the PCB substratum because of inadequate heat needed to keep the ball Pb-free and/or because of a BGA and PCB-microcrack resulting from excessive thermal stress. For example:

Basic PCB Cleaning and Rework Procedures

The following are some methods for routine PCB rework.

Cleaning: PCBs may include surface chemicals, such as welding, coating, and binding, that may severely affect their electrical properties and physical components. These surface pollutants are either washed in the form of automatic cleaning or cleaning agents.

Compliant coating removal: the first task in the Absolute PCB repair process is always to remove the conformal coating. Conformal coating is characterized as a chemical protection layer that protects electronic circuits against a hard environment that contains many chemical contaminants.

Once the form of coating has been determined, the following methods may be removed:

Solvent Method: By using solvents, this technique deletes the lacquer. This is the optimal method for removing the solder resistance total coating.

Method of Peeling: this method of elimination of the coating is ideal for scraping RTV silicone or other dense coating materials.

Thermal procedure: this procedure uses low temperatures to extract the heavy layer from PCBs—thermal process.

System of scraping: The scraping instruments in this method are made using a scraper dental.

Coating Replacement: This technique specifies, as the name implies, various approaches used to substitute BGA-located solder masks and circuit board coatings.

Preheating and baking: all humidity from the plastic components is the explanation for baking PCBs before the rework. If SMT components are reflowed, then the components’ temperature increases very fast, and some moisture becomes steam. This increase leads to a paralyzed board.

Read more: https://www.estartupstory.com/a-guide-about-the-usage-of-desoldering-pump/